Eshooter Ember Airsoft LiPo Battery 11.1V 1000mAh 25C USB-C T-Plug ESH393001
Description of Eshooter Ember Airsoft LiPo Battery 11.1V 1000mAh 25C USB-C T-Plug
The Eshooter Ember LiPo battery features an integrated USB-C port with Power Delivery PD 3.0 fast charging at up to 30W. According to the manufacturer, it can reach up to 80% charge in 16 minutes and supports five charging profiles. It can be connected to compatible USB-C sources, including phone chargers, power banks and car chargers, without requiring an external LiPo balance charger, balance board or dedicated charging cradle.
Its dual-circuit protection system independently manages the charging input and discharge output. The input circuit provides balance charging and overcharge protection, while the output circuit provides discharge protection. The system also protects against over-discharging and short circuits. A status LED identifies charging, low battery, full charge and error conditions.
The CNC-machined aluminium unibody protects the cells and helps dissipate heat. Its single-piece construction removes housing seams, snap-fit halves, shrink wrap, external leads and exposed solder joints. Measuring 145 x 22 x 17 mm and weighing approximately 95 g, the Eshooter Ember 11.1V 1000mAh 25C battery maintains a narrow profile for compatible battery compartments. Users should confirm both the electrical compatibility of their airsoft replica and the available compartment space before purchase.
Features of Eshooter Ember Airsoft LiPo Battery 11.1V 1000mAh 25C USB-C T-Plug
· Model: Ember Smart Battery
· Product code: G100
· Product type: Smart LiPo battery for airsoft electric guns
· Compatibility: AEGs rated for 11.1V LiPo batteries
· Configuration: 3S1P
· Voltage: 11.1V
· Capacity: 1000mAh
· Rated energy: 11.1Wh
· Discharge rate: 25C
· Output connector: Integrated Deans-style T-Plug
· Connector contacts: Gold-plated copper alloy
· Charging port: Integrated USB-C
· Wire-free design: Integrated connectors eliminate the need for external leads
· Exposed wiring: No
· Exposed solder joints: No
· Maximum charging power: 30W
· Fast-charging system: USB Power Delivery PD 3.0
· Charging profiles: 5
· Specified charging time: Up to 80% in 16 minutes
· Compatible charging sources: Compatible phone chargers, power banks and car chargers
· External balance charger: Not required
· Cell management: Integrated and sealed inside the body
· Protection system: Independent dual-circuit protection for input and output
· Input protection: Balance charging and overcharge protection
· Output protection: Discharge protection
· Overcharge protection: Yes
· Over-discharge protection: Yes
· Short-circuit protection: Yes
· Red status LED: Charging or low battery
· Green status LED: Fully charged
· Red and green status LEDs: Error
· Construction: CNC-machined aluminium unibody
· Physical protection: Aluminium housing protects the cells
· Heat dissipation: Aluminium housing helps dissipate heat
· Housing design: Single-piece body with no seams, snap-fit halves or shrink wrap
· Length: 145 mm
· Width: 22 mm
· Height: 17 mm
· Weight: Approximately 95 g
· Flame-retardant rating: UL94 V-0
· Specified temperature range: -20 to 120 °C
Warnings:
· Confirm that the AEG supports 11.1V LiPo batteries before use
· Check the dimensions of the battery compartment before purchase
· Use a USB-C power source compatible with the charging system
· Inspect the battery and connectors before every use
· Do not use the battery if it is swollen, punctured or visibly damaged
· Do not short-circuit the terminals
· Do not expose the battery to fire, water or intense heat
· Do not leave the battery unattended while charging
At MCL Interglobal we offer you a wide range of Airsoft products and tactical equipment.
If you are a store in the sector, register as a wholesale customer and get the best price on Eshooter products.