Adjustable Brushless AEG Motor DragonPro DPX 39000-48000 RPM AirsoftDP-MSE-X48A
Adjustable Brushless AEG Motor DragonPro DPX 39000-48000 RPM Airsoft
The adjustable brushless motor from the DragonPro DPX Series is a next-generation high-performance power unit engineered to deliver extreme output, instant response and advanced electronic control for professional-grade AEG rifles. Built with a CNC-machined 6063 aluminum housing and rear cap, a highly durable 70# carbon-steel shaft and a high-quality removable D-cut pinion gear, this motor offers exceptional structural rigidity, precision and long-term reliability. Inside, it features high-temperature-resistant copper windings and powerful Nd-Fe-B rare-earth magnets, ensuring stable power delivery even under heavy load. Its fully custom in-runner architecture maximizes torque, efficiency and smooth operation.
The DPX integrates an internal ESC and an advanced MOSFET unit, allowing the user to select between 39,000, 42,000, 45,000 or 48,000 RPM, providing a level of adjustability and control far beyond traditional motors. It includes a complete suite of electronic protections: low-voltage cutoff (6V on 2S, 9V on 3S), over-voltage protection above 13.5V, thermal protection up to 100?°C and stall protection to prevent damage when the motor cannot rotate properly. The brushless design eliminates commutator wear, reduces mechanical and electrical noise, improves energy efficiency and significantly extends the motor’s lifespan. With ultra-fast reaction time, superior torque-to-weight ratio and near-elimination of EMI and ESD, the DPX stands out as one of the most advanced and reliable options on the market for demanding AEG builds.
The DPX integrates an internal ESC and an advanced MOSFET unit, allowing the user to select between 39,000, 42,000, 45,000 or 48,000 RPM, providing a level of adjustability and control far beyond traditional motors. It includes a complete suite of electronic protections: low-voltage cutoff (6V on 2S, 9V on 3S), over-voltage protection above 13.5V, thermal protection up to 100?°C and stall protection to prevent damage when the motor cannot rotate properly. The brushless design eliminates commutator wear, reduces mechanical and electrical noise, improves energy efficiency and significantly extends the motor’s lifespan. With ultra-fast reaction time, superior torque-to-weight ratio and near-elimination of EMI and ESD, the DPX stands out as one of the most advanced and reliable options on the market for demanding AEG builds.
Adjustable Brushless AEG Motor DragonPro DPX 39000-48000 RPM Airsoft
· Type: High-performance adjustable brushless motor for AEG rifles
· Series: DPX Series
· Brand: DragonPro
· Motor housing: CNC-machined 6063 aluminum, lightweight, rigid and durable
· Rear cap: Precision-machined CNC 6063 aluminum
· Axle: 70# carbon steel, wear-resistant and capable of handling high loads
· Pinion gear: High-quality D-cut removable pinion for quick and easy swaps
· Windings: High-temperature-resistant copper windings
· Magnets: High-power Nd-Fe-B (rare-earth neodymium magnets)
· Fully custom in-runner design for maximum power and torque
· Integrated MOSFET unit for advanced electronic control
· Battery low-voltage protection:
· 2S (7.4V) below 6V
· 3S (11.1V) below 9V
· High-voltage protection: cutoff above 13.5V
· Temperature protection up to 100?°C
· Stall protection when the motor cannot rotate smoothly
· Internal ESC with over-current protection and low-voltage cutoff
· Elimination of ionizing sparks (ESD)
· Near-elimination of electromagnetic interference (EMI)
· Reduced mechanical and electrical noise
· Increased reliability and lower maintenance (no brushes or commutator)
· Extremely fast reaction time
· Higher torque-to-weight and torque-to-power-input ratio (improved efficiency)
· Adjustable speed range: selectable speeds 39,000 RPM, 42,000 RPM, 45,000 RPM, or 48,000 RPM
· Precise electronic adjustment via the internal ESC
· Ideal for High-Speed configurations and advanced setups
Technical Specifications (11.1V, 25–30 °C)
No-Load Performance
· Speed: 48,000 RPM
· Current: 3.7 A
Stall Performance
· Torque: 473.7 mN·m
· Current: 222 A
Maximum Efficiency
· Efficiency: 75.8 %
· Torque: 54.2 mN·m
· Speed: 42,512 RPM
· Current: 28.66 A
· Output power: 240.9 W
Maximum Power Output
· Output power: 595 W
· Torque: 236.9 mN·m
· Speed: 24,000 RPM
· Current: 112.85 A
Motor Brushless DragonPro DPX Series Important Usage Notes
1) Do not reverse the polarity: Always ensure the positive and negative terminals are connected correctly. Reversing the polarity may burn or permanently damage the motor
2) Handle the speed-adjustment slot with care: The speed regulation system uses a small plastic adjustment slot. Do not apply excessive force when turning it, as it may break. When it reaches its limit and stops turning, do not force it further. The motor is preset to maximum RPM from the factory
3) Ensure the motor is firmly seated inside the grip and protect the wiring: The motor must not move or shift inside the grip. If the connecting wire is too stiff, secure it with electrical tape. Otherwise, the pulling motion during startup and braking may stress the terminals and cause them to break
4) Do not replace the motor pinion gear unless absolutely necessary: If replacement is required, make sure the fit between the motor shaft and the pinion is not excessively tight. A pinion pressed in too tightly may shift the shaft out of alignment, causing the motor to seize and burn out.
IMPORTANT USER WARNING
This adjustable brushless motor from the DPX Series is a high-performance component capable of generating extremely high rotational speeds (39,000 / 42,000 / 45,000 / 48,000 RPM) and significant torque, especially at its highest speed settings. Due to its superior power and efficiency, your AEG rifle must be equipped with high-quality internal components capable of withstanding the mechanical, thermal and dynamic stresses produced by this motor.
· It is strongly recommended to use reinforced gears, high-quality bushings or bearings, durable pistons, proper wiring and a trigger unit prepared for high-performance builds.
· Using low-quality internal parts may result in premature wear, breakage, jams or mechanical failures due to the high torque and RPM generated by this motor.
· For safe and optimal operation, installation and tuning should be performed by a qualified technician or an experienced user familiar with advanced AEG builds.
This warning is not a limitation, but a guarantee that the DPX motor can deliver its full potential without compromising the integrity of your AEG rifle.
· Series: DPX Series
· Brand: DragonPro
· Motor housing: CNC-machined 6063 aluminum, lightweight, rigid and durable
· Rear cap: Precision-machined CNC 6063 aluminum
· Axle: 70# carbon steel, wear-resistant and capable of handling high loads
· Pinion gear: High-quality D-cut removable pinion for quick and easy swaps
· Windings: High-temperature-resistant copper windings
· Magnets: High-power Nd-Fe-B (rare-earth neodymium magnets)
· Fully custom in-runner design for maximum power and torque
· Integrated MOSFET unit for advanced electronic control
· Battery low-voltage protection:
· 2S (7.4V) below 6V
· 3S (11.1V) below 9V
· High-voltage protection: cutoff above 13.5V
· Temperature protection up to 100?°C
· Stall protection when the motor cannot rotate smoothly
· Internal ESC with over-current protection and low-voltage cutoff
· Elimination of ionizing sparks (ESD)
· Near-elimination of electromagnetic interference (EMI)
· Reduced mechanical and electrical noise
· Increased reliability and lower maintenance (no brushes or commutator)
· Extremely fast reaction time
· Higher torque-to-weight and torque-to-power-input ratio (improved efficiency)
· Adjustable speed range: selectable speeds 39,000 RPM, 42,000 RPM, 45,000 RPM, or 48,000 RPM
· Precise electronic adjustment via the internal ESC
· Ideal for High-Speed configurations and advanced setups
Technical Specifications (11.1V, 25–30 °C)
No-Load Performance
· Speed: 48,000 RPM
· Current: 3.7 A
Stall Performance
· Torque: 473.7 mN·m
· Current: 222 A
Maximum Efficiency
· Efficiency: 75.8 %
· Torque: 54.2 mN·m
· Speed: 42,512 RPM
· Current: 28.66 A
· Output power: 240.9 W
Maximum Power Output
· Output power: 595 W
· Torque: 236.9 mN·m
· Speed: 24,000 RPM
· Current: 112.85 A
Motor Brushless DragonPro DPX Series Important Usage Notes
1) Do not reverse the polarity: Always ensure the positive and negative terminals are connected correctly. Reversing the polarity may burn or permanently damage the motor
2) Handle the speed-adjustment slot with care: The speed regulation system uses a small plastic adjustment slot. Do not apply excessive force when turning it, as it may break. When it reaches its limit and stops turning, do not force it further. The motor is preset to maximum RPM from the factory
3) Ensure the motor is firmly seated inside the grip and protect the wiring: The motor must not move or shift inside the grip. If the connecting wire is too stiff, secure it with electrical tape. Otherwise, the pulling motion during startup and braking may stress the terminals and cause them to break
4) Do not replace the motor pinion gear unless absolutely necessary: If replacement is required, make sure the fit between the motor shaft and the pinion is not excessively tight. A pinion pressed in too tightly may shift the shaft out of alignment, causing the motor to seize and burn out.
IMPORTANT USER WARNING
This adjustable brushless motor from the DPX Series is a high-performance component capable of generating extremely high rotational speeds (39,000 / 42,000 / 45,000 / 48,000 RPM) and significant torque, especially at its highest speed settings. Due to its superior power and efficiency, your AEG rifle must be equipped with high-quality internal components capable of withstanding the mechanical, thermal and dynamic stresses produced by this motor.
· It is strongly recommended to use reinforced gears, high-quality bushings or bearings, durable pistons, proper wiring and a trigger unit prepared for high-performance builds.
· Using low-quality internal parts may result in premature wear, breakage, jams or mechanical failures due to the high torque and RPM generated by this motor.
· For safe and optimal operation, installation and tuning should be performed by a qualified technician or an experienced user familiar with advanced AEG builds.
This warning is not a limitation, but a guarantee that the DPX motor can deliver its full potential without compromising the integrity of your AEG rifle.
MCL Interglobal exclusive official distributor of DragonPro.
At MCL Interglobal we offer you a wide range of Airsoft products and tactical equipment.
If you are a store in the sector, register as a wholesale customer and get the best price on DragonPro products.
At MCL Interglobal we offer you a wide range of Airsoft products and tactical equipment.
If you are a store in the sector, register as a wholesale customer and get the best price on DragonPro products.